Can we just look at things objectively? Plumbing issues can be a genuine cerebral pain. In addition to the fact that they are badly arranged, they can prompt serious harm to your home whenever left uncontrolled. Fortunately, numerous normal pipe incidents can be effectively avoided.
In this blog post, we’ll discuss the top ten plumbing mistakes that homeowners in Australia make and give you the information you need to keep your pipes in good shape. You can avoid paying a large bill to plumbers in Dandenong and a lot of stress by following these straightforward guidelines!
DIY Mishaps: When to Bring in the Experts
While there’s a sure fulfilment that accompanies fixing things yourself, plumbing isn’t generally a Do-It-Yourself project. Over 30% of plumbing issues are exacerbated when homeowners attempt to fix them themselves. It is always best to hire a licensed plumber if you are unsure of your plumbing abilities. Plumbers from Doyle Plumbing Group are equipped with the knowledge and equipment necessary to quickly and effectively identify and address issues, minimising the likelihood of recurrence.
The following are indications that you should contact a plumber:
- Unusual low water pressure
- Clogged drains that won’t move with a plunger
- Leaky faucets or pipes
- Toilets that overflow or won’t flush properly
Ignoring the Gurgling
Think that the gurgling sound coming from your drains is just a weird house noise? Early detection is key. Reconsider! Sputtering channels frequently demonstrate a blockage shaping someplace in the framework. These obstructions can get worse if left unchecked, resulting in complete drain backups and overflows.
What you should do is:
For minor obstructions: The clog can be cleared with a drain snake or a plunger. It’s time to get in touch with plumbers in Dandenong if that doesn’t work.
For gurgling, that won’t stop: This may indicate a vent pipe obstruction that requires professional attention.
Disinfecting the Drain with Grease
Grease is a recipe for disaster. Although it may appear to be easily removed with hot water, it actually cools and solidifies in your pipes, resulting in significant blockages over time. In all actuality, oil ought never to go down the channel!
Here is the brilliant rule:
Get oil: Scrape the cooled and solidified cooking grease into a bin.
Wipe with paper towels: Before washing pots and pans, use paper towels to remove smaller amounts of grease.
Not Using the Plunger Enough
When it comes to clearing up clogged drains, a good plunger is a homeowner’s best friend. However, not every plunger is the same. You won’t be able to clear stubborn obstructions with a cheap, fragile plunger.
What you should look for:
Flange size: A bigger spine (the elastic cup) makes a superior seal for the greatest pull power.
Accordion structure: This kind of unclogger is explicitly intended for latrines and can really clear obstructs without sprinkling.
Failing to Remember the Waste Disposal
First of all, remember not mindlessly to drop everything in the garbage bin. Although they are a useful kitchen appliance, garbage disposals are not impenetrable. Certain items can cause clogs or damage to the blades.
Avoid placing the following items in the disposal:
Espresso beans: These have the potential to congregate into a clog.
Eggshells: The films can get tangled around the sharp edges and dull them.
Organic product pits: These are excessively difficult to remove and can harm the cutting edges.
Grease and oil: Grease solidifies and can clog the disposal, as previously mentioned.
A Pro Tip: While using the disposal, run cold water to help flush food scraps down the drain.
Chemical Attacks
Is drain cleaner the real solution? Those unforgiving substance channel cleaners you see at the grocery store might appear to be a convenient solution, yet they can really cause more damage than great. If not handled properly, these chemicals can harm your pipes and even burn your skin.
A safer alternative is:
Cleansers for natural drains: A combination of baking pop and vinegar can frequently separate gentle obstructs.
Call a Plumber: For harder obstructs, it’s best to call expert plumbers in Dandenong who can securely and successfully eliminate the blockage in every case.
Trouble With the Heat Pump
Reduce the Temperature Did you know that increasing the temperature of your hot water heater can not only result in scalding hot showers but also reduce the appliance’s lifespan and raise your energy costs? The majority of hot water heaters in Australia are set to around 60°C (140°F), which is a safe and comfortable temperature.
This is the way to figure out the perfect balance:
Really take a look at your heated water tank manual: The producer will suggest an ideal temperature range.
Make a purchase of a hot water tempering valve: To keep the water at the tap safe and consistent, this device mixes hot and cold water automatically.
Overlooking Yearly Upkeep
Preventative maintenance is just as important for your plumbing system as it is for your automobile. A yearly review by authorised plumbers in Dandenong can recognise likely issues before they become significant cerebral pains.
During a check for maintenance, a plumber can:
Check the connections and pipes: Search for indications of breaks, erosion, or mileage.
Check water pressure: Check to see that your home’s water pressure is within the normal range.
Clean out your hot water tank: This gets rid of sediment buildup, which can hurt performance.
Planting the Wrong Trees
Keep an eye on your roots. Trees can beautify your property and provide shade, but planting the wrong kind too close to your house can cause plumbing problems. Tree roots are known for looking for water sources and can get into pipes and break or block them.
This is what to remember:
Select the proper tree: Choose trees with non-invasive root systems and slow growth rates.
At a safe distance, plant trees: Make sure you plant the tree far enough away from your foundation and sewer lines to take into account its mature size.
Underestimating Water Pressure
Water pressure that is too high can overburden your lines and joints, prompting holes and likely explodes. Homes in Australia typically have water pressures between 50 and 70 kPa.
This is the way to screen your water pressure:
Set up a pressure meter: You can quickly and easily check your water pressure with this straightforward gadget.
Contact your water supplier: They may be able to adjust your water pressure at the source if it is always high.
Summing Up
By following these tips and deceives, you can keep your pipes framework moving along as planned and stay away from expensive amazements. Remember that it is always best to hire a licensed plumber when in doubt.
Doyle Plumbing Group is your reliable partner for all of your plumbing needs. We know how important it is to have a plumbing system that works properly. From routine maintenance to emergency repairs, our team of skilled and experienced plumbers is here to assist you.
